WOOD STAIN & FINISH SUPPLY CENTER

Cetol SRD

Sikkens Cetol SRD is a one-coat, translucent exterior wood finish created for use on a wide variety of surfaces. The easy-to-use finish has excellent UV protection and allows beautiful wood clarity.

Type:
Translucent

Sheen:
Matte

DESCRIPTION:
One coat, non-film forming, translucent wood finish.

USAGE:
Siding, Railings, Decks, Siding Shakes and Shingles, Fences, Boat Docks, Outdoor Furniture, Logs.

FEATURES:
One Coat Application, Easy Maintenance, UV Protection, Water Repellent.

TECHNOLOGY:
Alkyd Oil

OTHER USES:
Exterior, Log Home

COLORS:

ADDITIONAL INFORMATION:
• Cetol SRD Application Guide (.pdf)
• Cetol SRD MSDS (.pdf)
• Cetol SRD RE MSDS (.pdf)
• Cetol SRD 250 MSDS (.pdf)
• Cetol SRD TDS (.pdf)

Cetol Log & Siding

Cetol Log & Siding is a high-performance translucent satin finish for exterior vertical wood surfaces. This alkyd high solids formulation offers optimum protection and a premium look in just two coats. The high solids alkyd resin used in Cetol Log & Siding is another example of Sikkens' commitment to providing superior quality wood coatings.

Type:
Translucent

Sheen:
Satin

DESCRIPTION:
This alkyd high solids formulation offers optimum protection and a premium look in just two coats.

USAGE:
Siding, Logs, Trim.

FEATURES:
High Solids Alkyd, Translucent Iron Oxide Pigments and UV Absorbers, Excellent Microporosity and Flexibility.

TECHNOLOGY:
High Solids Alkyd

COLORS:

ADDITIONAL INFORMATION:
• Cetol Log & Siding Application Guide (.pdf)
• Cetol Log & Siding MSDS (.pdf)
• Cetol Log & Siding TDS (.pdf)

Cetol 1

Cetol 1 is a premium, translucent exterior wood basecoat to be used with Cetol 23 Plus. Its superior alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces.

Type:
Translucent

Sheen:
Satin

DESCRIPTION:
Premium translucent exterior wood basecoat to be used with Cetol 23 Plus. Can also be used alone or with other products.

USAGE:
Siding, Trim, Entrance Doors, Garage Doors, Windows, Log Homes, Outdoor Furniture, Fences.

FEATURES:
Superior UV Protection, Highly Transparent, Water Repellent, Weather Resistant, Flexible, Breathable.

TECHNOLOGY:
Alkyd Oil

COLORS:

ADDITIONAL INFORMATION:
• Cetol 1 Application Guide (.pdf)
• Cetol 1 MSDS (.pdf)
• Cetol 1 RE MSDS (.pdf)
• Cetol 1 TDS (.pdf)

Cetol 23 Plus

Cetol 23 Plus is a premium, translucent topcoat for Cetol 1. The advanced alkyd resin with UV absorbers offers excellent durability and protection for siding and other vertical surfaces.

Type:
Translucent

Sheen:
Satin

DESCRIPTION:
Premium translucent topcoat for Cetol 1.

USAGE:
Siding, Trim, Entrance Doors, Garage Doors, Windows, Log Homes.

FEATURES:
Superior UV Protection, Highly Transparent, Water Repellent, Weather Resistant, Flexible, Breathable.

TECHNOLOGY:
Alkyd

*Cetol 23 Plus RE is available where reduced emission products are required.

COLORS:

ADDITIONAL INFORMATION:
• Cetol 23 Plus Application Guide (.pdf)
• Cetol 23 Plus MSDS (.pdf)
• Cetol 23 Plus RE MSDS (.pdf)
• Cetol 23 Plus TDS (.pdf)

Cetol Maintenance

Cetol Maintenance is a premium, non-pigmented exterior finish to be used over existing Cetol 23 Plus or Cetol Log & Siding as a maintenance coat. Typically, with maintenance coats, pigmented products will further darken the wood. With a one coat application of Cetol Maintenance, the wood will retain the same look and color.

Type:
Transparent

Sheen:
Satin

DESCRIPTION:
Cetol Maintenance is a premium, transparent exterior satin finish that can only be applied over a previously coated Cetol system, as a maintenance coat. Wood will then preserve its appearance and color.

USAGE:
Siding, Logs, Trim.

FEATURES:
• Non-pigmented (colorless) maintenance coating: Prevents the wood color from darkening after several maintenance coats. Can only be applied over a previously coated Cetol 23 Plus or Cetol Log & Siding system where the surface is in good condition and has been maintained according to Sikkens guidelines. • High solids alkyd: Provides maintenance protection in one coat.
• Excellent microporosity and flexibility: Minimizes blistering and cracking due to expansion and contraction or moisture build-up.

TECHNOLOGY:
High Solids Alkyd

ADDITIONAL INFORMATION:
• Cetol Maintenance Application Guide (.pdf)
• Cetol Maintenance MSDS (.pdf)
• Cetol Maintenance TDS (.pdf)

Cetol Door & Window

Sikkens Cetol Door & Window is a high-performance finish for specialty applications such as exterior doors and windows. the alkyd high-solids formulation offers optimum protection and a distinctive look for these unique areas. Available as a clear satin, clear gloss or four ready-mix colors in a satin finish.

Type:
Clear

Sheen:
Gloss and Satin

DESCRIPTION:
This alkyd high solids formulation offers optimum protection and a distinctive look for these unique areas. Available as a clear satin, clear gloss or 4 ready mix colors in satin.

USAGE:
Doors, Windows, Garage Doors, Fiberglass Doors.

FEATURES:
High Solids Alkyd, Translucent Iron Oxide Pigments and UV Absorbers, Excellent Microporosity and Flexibility.

TECHNOLOGY:
High Solids Alkyd

COLORS:

ADDITIONAL INFORMATION:
• Cetol Door & Window Application Guide (.pdf)
• Cetol Door & Window Gloss MSDS (.pdf)
• Cetol Door & Window Satin MSDS (.pdf)
• Cetol Door & Window Plus TDS (.pdf)

Cetol Semi-Transparent SRD

Cetol SRD Semi-Transparent Stain is a one-coat, exterior wood stain for use on a variety of exterior wood surfaces. The three way UV protection combined with high solids alkyd resin make Cetol SRD Semi-Transparent Stain another example of the advancements central to Sikkens Next Wave Technology.

Type:
Semi-Transparent

Sheen:
Matte

DESCRIPTION:
One Coat Non-Film Forming Semi-Transparent Wood Stain.

USAGE:
Siding, Railings, Decks, Siding Shakes & Shingles, Fences, Boat Docks, Outdoor Furniture, Logs.

FEATURES:
Three Way UV Protection.

TECHNOLOGY:
Waterborne

COLORS:

ADDITIONAL INFORMATION:
• Cetol Semi-Transparent SRD Application Guide (.pdf)
• Cetol Semi-Transparent SRD MSDS (.pdf)
• Cetol Semi-Transparent SRD TDS (.pdf)

Rubbol Solid Stain

Rubbol Solid Stain is a hybrid alkyd/acrylic with the advantages of both technologies. This formula offers excellent penetration and adhesion over both bare and previously coated surfaces. This premium, solid color stain has a low sheen finish that will complement any décor.

Type:
Solid

Sheen:
Low Lustre

DESCRIPTION:
Rubbol Solid Stain's lightfast formula ensures long-term beauty of the wood surface, enhances exterior wood with a bright and smooth finish, with easy application and soap and water clean up.

USAGE:
All types of exterior wood, except exotic hardwood.

TECHNOLOGY:
Water based

COLORS:

ADDITIONAL INFORMATION:
• Rubbol Solid DEK MSDS (.pdf)
• Rubbol Solid DEK TDS (.pdf)

Cabot 1400 Series Semi-Solid Deck & Siding Stain

Cabot® Semi-Solid Deck & Siding Stains are deep penetrating linseed oil-based stains that provide long lasting beauty and wood protection, highlight the natural beauty of the wood's texture with a uniquely pigmented appearance. With their extra pigmentation, Cabot Semi-Solid Deck & Siding Stains are extremely durable and help protect wood against the sun's damaging ultraviolet rays.

Type:
Semi-Solid

FEATURES:
• Uniquely formulated for superior durability
• Oil-based and water repellent
• Best recommendation for decks
• Ideal for use on decks, siding, and fencing
• Deep penetrating semi-solid finish for superior UV protection
• Scuff and fade resistant
• One coat application

COVERAGE:
On smooth surfaces, approximately 400-500 square feet per gallon. These rates will vary depending upon the porosity of the surface.

USAGE:
Cabot Semi-Solid Deck & Siding Stains are ideal for use on wood where hiding coverage is desired, yet penetrating wood protection is needed. They also provide an outstanding value as a one-coat finish for recoating previously semi-transparent-stained surfaces. Cabot Semi-Solid Deck & Siding Stains can be used on most types of smooth and rough exterior wood, including decks, siding, fences, log homes and roofs. They provide excellent results on weathered wood and well-seasoned lumber such as cedar, fir, pine, cypress, spruce, redwood and plywood panel siding.

COLORS:
[ Cabot Semi-Solid Color Chart ]

ADDITIONAL INFORMATION:
• Cabot 1400 Series TDS (.pdf)

Cabot 0300 Series Semi-Transparent Deck & Siding Stain

Cabot® Semi-Transparent Stains are deep penetrating, linseed oil-based stains that beautify and protect exterior wood. These lightly pigmented stains enhance the natural beauty of the wood by allowing the grain, texture, and color variations within the wood to show through. Acrylic 1300 series combines penetrating properties of oil-based with easy soap-and-water clean-up of water-based finishes. Will provide long-lasting, vapor-permeable protection that beautifies and enriches exterior wood surfaces. Formulated with non-fade, earth tone pigments to weather slowly over time.

Type:
Semi-Solid

FEATURES:
• Lightly pigmented to accentuate wood grain
• Oil Based and Acrylic Water Based formulas available
• Water-repellent and UV protection
• Oil based formula is ideal for decks, siding and fences
• One coat application
• When properly applied won't crack, peel or blister

COVERAGE:
On smooth surfaces, approximately 450-650 square feet per gallon; on rough surfaces, 200-300 square feet per gallon.

USAGE:
Cabot Semi-Transparent Oil Based Stains are for use on exterior wood decks, siding, fences, shingles and roofs. Acrylic water based stains are for use on exterior wood siding, shingles, shakes and roofs. They are especially effective on rough-sawn surfaces; and excellent results are obtained on premium grade lumber such as cedar, fir, pine, cypress, spruce, redwood and plywood panel siding.

COLORS:
[ Cabot Semi-Transparent Color Chart ]

ADDITIONAL INFORMATION:
• Cabot 0300 Series TDS (.pdf)

Cabot 3000 Series Wood Toned Deck & Siding Stain

Cabot® Wood Toned Deck & Siding Stain is specially formulated with a unique blend of resin and oil to provide a superior natural finish for bare wood. This distinctive product comes in five natural tones that not only sustains the natural beauty of exterior wood, it also provides excellent wood penetrating protection against the sun and all damaging weather elements. It's water-repellent, to keep moisture out and guard against warping and checking, plus it's mildew resistant. Easy to apply requiring just one coat, Cabot Wood Toned Deck & Siding Stain slightly darkens wood when first applied leaving a flat and translucent finish. The finish then slowly weathers with time to a natural wood hue depending upon the color of product chosen and the particular wood type on which it was applied.

Type:
Translucent

FEATURES:
• A translucent oil finish that protects and beautifies wood's natural appearance
• Water repellent; deep penetrating
• Ideal for decks, siding, fences and trim
• 5 colors

COVERAGE:
On smooth surfaces, approximately 400-600 square feet per gallon; on rough surfaces, 200-300 square feet per gallon. These rates will vary depending upon the porosity of the surface.

USAGE:
Cabot Wood Toned Deck & Siding Stain is for use on new or reconditioned wood only, including decks, siding, roofs, shingles, shakes, trim and on log homes. Cabot Wood Toned Deck & Siding Stain can be applied to all natural wood species such as cedar, fir, pine, cypress, spruce, redwood and plywood, including Texture 1-11, and will produce outstanding results on all premium grade lumber. It can also be applied to pressure-treated wood.

COLORS:

ADDITIONAL INFORMATION:
• Cabot 3000 Series TDS (.pdf)

Cabot 3400 Series Australian Timber Oil

Cabot® Australian Timber Oil for Decks, Siding, Railings and Outdoor Furniture is a unique blend of oils originally formulated to protect dense tallowwood, cambara and merbau from the extreme Australian exposures. Australian Timber Oil penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure South American tung oil for color depth and water repellency, Australian Timber Oil delivers three-way oil protection. In addition, complex translucent iron oxide pigments are added to ensure a lasting U.V.-absorbing surface rich with color and dimension. The result after years of development is an advanced-technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before.

Type:
Translucent

FEATURES:
• Oil-based
• 3-way oil protection for superior penetration
• Ideal for decks, siding, railings, and outdoor furniture
• 5 colors

COVERAGE:
On smooth surfaces, approximately 400-600 square feet per gallon (9.8-14.7 square meters per liter); on rough surfaces, 250-350 square feet per gallon (6.1-8.6 square meters per liter). These rates will vary depending upon the porosity of the surface.

USAGE:
Now this technology is available in the United States as a proven translucent oil treatment for mahogany, teak and other premium exotic wood surfaces used for decks and outdoor furniture.

COLORS:

ADDITIONAL INFORMATION:
• Cabot 3400 Series TDS (.pdf)

Cabot Problem Solver Wood Primer

Cabot® Problem-Solver Primer is an exterior primer specially designed to provide maximum performance through a faster drying and higher-hiding formulation under Cabot Solid Color Stains and high quality exterior paints. Available in both water-borne and oil-based formulas as regulations allow. Cabot Problem-Solver Primer has superior resistance to extractive bleeding and moisture problems and facilitates the application of a quality finish coat within just a few hours. The oil-based product is a 100% alkyd primer and dries in a fraction of time compared to traditional linseed oil-based primers. The water-borne product is widely available and has easy soap and water cleanup. Cabot Problem-Solver Primer will yield outstanding results on siding, shingles, plywood, and on both smooth or rough-sawn surfaces. It is also suited for application over previously oil-based stained or painted surfaces.

Type:
Wood Primer

FEATURES:
• Exceptional adhesive properties
• Faster drying
• High hiding
• Bonds with extractive tannin bleed to lock unsightly discoloration
• Ideal for use on siding, trim and decks

COVERAGE:
One gallon covers from 150 to 500 square feet, depending on product used and condition of surface.

USAGE:
Cabot Problem-Solver Primer is recommended for use on extractive-prone wood species such as red cedar, redwood, mahogany and fir. It is also excellent when applied to pine, cypress, spruce, and even pressure-treated wood. This product has exceptional adhesive properties and can be applied immediately to new, dry, unseasoned, mill-glazed (smooth) siding.

ADDITIONAL INFORMATION:
• Cabot Problem Solver Acrylic Primer with LokzAll TDS (.pdf)
• Cabot Problem Solver Primer TDS (.pdf)

Cabot 1000 Series Waterproofing

Cabot® Waterproofing is an advanced-technology silicone sealer that provides unsurpassed waterproofing protection to a multitude of surfaces. This convenient and simple-to-use formulation penetrates and fills the pores of the substrate with a premium-grade silicone sealer, and unlike waxes, silicone will impart a lasting repellency to any surface to which it is applied.

Type:
Waterproofer

FEATURES:
• Water-based
• Unique silicone formula
• Ideal for wood, brick and concrete

COVERAGE:
100-250 square feet per gallon (2.5-6.2 m²/L). Rates will vary depending on porosity of the surface.

USAGE:
Cabot Waterproofing is for application to wood, concrete, brick, masonry and a wide-variety of porous substrates including brick, stone and unglazed tile. It is ideal for new or properly reconditioned decks, fences, siding, shingles, shakes and logs.

ADDITIONAL INFORMATION:
• Cabot 1000 Series Waterproofing TDS (.pdf)

Olympic Semi-Transparent Deck, Fence, Siding Stain

Olympic® Exterior Stains are defined by the level of color and the amount of wood grain and texture that shows through. All prevent moisture damage, block damaging ultraviolet (U.V.) rays, add durability and provide a mildew-resistant coating.

Type:
Semi-Transparent

FEATURES:
• WaterGuard® waterproofing protection
• Scuff Guard® formula
• SunBlock® U.V. protection
• Creates a mildew-resistant coating

COVERAGE:
250 to 350 sq. feet (23.2 to 32.5 sq. meters) depending on wood texture and porosity.

USAGE:
For use on decks, fences, siding, railings, outdoor furniture and other exterior wood surfaces. May be used on new wood, pressure-treated wood, weathered wood and wood previously coated with a solvent-based clear or semi-transparent stain.

COLORS:
[ Olympic Semi-Transparent Color Chart ]

ADDITIONAL INFORMATION:
• Olympic Deck Stain MSDS (.pdf)

Olympic Solid Color Deck, Fence, and Siding Stain

Olympic® Exterior Stains are defined by the level of color and the amount of wood grain and texture that shows through. All prevent moisture damage, block damaging ultraviolet (U.V.) rays, add durability and provide a mildew-resistant coating.

Type:
Solid

FEATURES:
• Durable 100% acrylic latex formula
• WaterGuard® waterproofing protection
• SunBlock® U.V. protection
• Scuff Guard® formula
• Creates a mildew-resistant coating
• Excellent adhesion to new, weathered and previously stained wood

COVERAGE:
350 to 500 sq. feet (32.5 to 46.5 sq. meters) depending on wood texture and porosity.

USAGE:
Use on exterior wood surfaces, such as decks, fences, siding, outdoor furniture and other exterior wood surfaces. May be used on new wood, pressure-treated wood, weathered wood and previously stained or painted wood.

COLORS:
[ Olympic Solid Color Chart ]

ADDITIONAL INFORMATION:
• Olympic Acrylic Deck Stain MSDS (.pdf)

Olympic Maximum Clear Waterproofing Sealant

Olympic® Exterior Stains are defined by the level of color and the amount of wood grain and texture that shows through. All prevent moisture damage, block damaging ultraviolet (U.V.) rays, add durability and provide a mildew-resistant coating.

Type:
Transparent

FEATURES:
• Penetrating oil formula for our best protection
• WaterGuard® plus two-way waterproofing protection
• Advanced SunBlock® U.V. protection
• Exclusive Scuff Guard® formula
• Creates best mildew-resistant clear

COVERAGE:
150 to 350 sq. feet (13.9 to 32.5 sq. meters) depending on wood texture and porosity.

USAGE:
Decks, fences, siding, outdoor furniture and playsets, new wood, pressure-treated wood, weathered wood and wood with a weathered solvent-based clear or semi-transparent stain.

ADDITIONAL INFORMATION:
• Olympic Maximum Clear Waterproofing Sealant MSDS (.pdf)

Olympic Maximum Toner Waterproofing Sealant

Olympic® Exterior Stains are defined by the level of color and the amount of wood grain and texture that shows through. All prevent moisture damage, block damaging ultraviolet (U.V.) rays, add durability and provide a mildew-resistant coating.

Type:
Toner

FEATURES:
• Acts as a stain and sealant
• Penetrating oil formula for our best protection
• WaterGuard® plus two-way waterproofing protection
• Advanced SunBlock® U.V. protection
• Exclusive Scuff Guard® formula
• Creates best mildew-resistant toner

COVERAGE:
150 to 350 sq. feet (13.9 to 32.5 sq. meters) depending on wood texture and porosity.

USAGE:
Use on exterior wood surfaces, such as decks, fences, siding, outdoor furniture and playsets. May be used on new wood, pressure-treated wood, weathered wood and wood with a weathered solvent-based clear or semi-transparent stain.

COLORS:

ADDITIONAL INFORMATION:
• Olympic Maximum Honey Gold Toner MSDS (.pdf)
• Olympic Maximum Cedar Naturaltone Toner MSDS (.pdf)
• Olympic Maximum Redwood Naturaltone Toner MSDS (.pdf)
• Olympic Maximum Canyon Brown Toner MSDS (.pdf)

Penofin Blue Label Finish

Penofin exterior finishes were formulated to safeguard the natural beauty of wood and to prevent discoloration from the sun's ultraviolet rays. Penofin resists and retards bleeding caused by nails. Two key ingredients contribute to Penofin's exceptional abilities:

Brazilian Rosewood Oil provides tough, deepdown moisture protection while still allowing the wood to "breathe." There's no surface film to trap moisture, chip, or peel.

Microscopically fine, transoxide pigments inhibit ultraviolet damage and darkening. They add deep, rich color without hiding the natural beauty of the grain. Semitransparent mist tones; Nantucket Mist mimics the look of weathered barn wood, Pacific Pearl Mist adds a whisp of white, and Mendocino Mist adds a hint of slate grey.

Type:
Semi-Transparent

FEATURES:
• The "work horse" of the Penofin product line
• 90% ultraviolet protection from transoxide pigments virtually eliminates fading due to sunlight
• Brazilian Rosewood Oil that deeply penetrates to protect against moisture
• Available in mist tones

COVERAGE:
Coverage depends on application method, texture and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon.

COLORS:

ADDITIONAL INFORMATION:
• Penofin Blue Label 550 VOC MSDS (.pdf)
• Penofin Blue Label 250 VOC MSDS (.pdf)
• Penofin Blue Label 100 VOC MSDS (.pdf)

Penofin Ultra Premium Finish

Ultra Premium Red Label Penofin was created to meet the demand for an exterior wood finish that outperforms all other transparent stains. The highly-penetrating Brazilian Rosewood Oil base, from sustainably harvested seeds, protects and nourishes wood fibers far deeper than any other stain. With the added mildew protection the "dark menace" will not attack wood so easily, and helps preserve that freshly-milled look. Penofin Ultra Premium Red Label is perfect where rain, wind, snow, or high elevations are encountered. The formula in Ultra Premium Red Label is the result of extensive testing, and the use of the highest quality ingredients. Penofin wins the "Battle Of The Stains" penetration tests over all competitors, and gives longer life to wood of any species. Easy to apply and simple to maintain.

Type:
Semi-Transparent

FEATURES:
• Ultra Premium Formula for Extra Performance
• Increased transoxide pigments for 99% ultraviolet protection against fading
• Extra protection against mildew
• Brazilian Rosewood Oil that deeply penetrates to protect against moisture
• Pigments won't fade, turn chalky or wash off

COVERAGE:
Coverage depends on application method, texture and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon.

COLORS:

ADDITIONAL INFORMATION:
• Penofin Ultra Premium 550 VOC MSDS (.pdf)
• Penofin Ultra Premium 250 VOC MSDS (.pdf)
• Penofin Ultra Premium 100 VOC MSDS (.pdf)

Penofin Hardwood Formula

Only Penofin's Hardwood Finish can penetrate dense hardwoods that need nourishing and stabilizing. This unique formula penetrates deep into the wood fibers and does not create a surface film. Unlike high-solid stains that simply coat the surface, Penofin's Hardwood Finish, using sustainably harvested Brazilian Rosewood Oil, is the choice of wood experts who know that wood penetration is key to longevity and beauty. Penofin allows wood to breathe, important in working with exotic hardwoods such as mahogany, teak, Ipe, Brazillian Redwood, and many other species. Only Penofin Penetrating Oil Finish can meet the needs of hardwood in fiber protection, penetration, stabilizing, and nourishing.

Type:
Transparent

FEATURES:
• Especially formulated to penetrate dense hardwoods
• Added ultraviolet protection
• Transparent natural tone allows the beauty of wood to be seen
• Used on some of the largest theme park boardwalks in the world
• Advanced mildew protection
• Not a surface film that will crack, bubble, or peel

COVERAGE:
Coverage depends on application method, texture and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon.

COLORS:

ADDITIONAL INFORMATION:
• Penofin Hardwood Formula 550 VOC MSDS (.pdf)
• Penofin Hardwood Formula 250 VOC MSDS (.pdf)
• Penofin Hardwood Formula 100 VOC MSDS (.pdf)

Penofin Marine Oil Finish

Penofin's Marine Oil Finish seals and protects the mill bright beauty of natural wood, giving it that hand-rubbed look mariners prefer. Multiple coats may be wet-sanded to build a lustrous self-filling, hand-rubbed finish, or simply apply product and remove excess with a nap-free cloth for a flat matte finish. Due to its unique penetrating abilities, any area that is scratched or stained may be repaired using the wetsanding method. Penofin's Marine Oil is nonyellowing, nondarkening and fast drying. No more sanding, scraping or stripping. Eliminates the cause of cracking and peeling, allowing product to penetrate deeply with Brazilian Rosewood Oil to enhance and protect your valuable wood. Penofin Marine Oil is easy to touch up. Just wipe on, allow it to penetrate the pores of the wood to feed and protect from the sun's harmful rays, then use a cloth to remove excess. Enhances natural wood like no varnish can. Don't let the varnish cycle trap you into spending sailing time scraping off layers of finish. Feed your wood... use Penofin Marine Oil Finish with Brazilian Rosewood Oil for the wood on fiberglass as well as wooden boats. Protects and enhances docks too.

Type:
Transparent

FEATURES:
• 99% ultraviolet protection
• Protects and beautifies like no varnish can
• Highest-quality mildew protection
• For use on boats, cabins, cockpits, decks, railings, and docks
• Safe and easy to use
• Available in a natural tone

COVERAGE:
Coverage depends on application method, texture and moisture content of wood. Coverage is less on rough surfaces, more on smooth surfaces. Average coverage is 175-300 sq. ft. per gallon.

COLORS:

ADDITIONAL INFORMATION:
• Penofin Hardwood Marine Oil 550 VOC MSDS (.pdf)
• Penofin Hardwood Marine Oil 250 VOC MSDS (.pdf)

Gemini Storm Shield Waterborne Wood Protectant

Storm Shield® is a unique combination of resins and pigments that enhances the natural beauty and warmth of old and new wood. The 100% acrylic system makes it user friendly, environmentally safe and easy to clean up with soap and water. Storm Shield provides superior water repellency and maximum protection from premature loss of color, surface mildew and water absorption. Powerful ultraviolet light screening chemicals reduce unsightly graying and loss of natural color. Storm Shield is available in SS601 Cedartone, SS602 Redwood, SS615 Honeytone and SS616 Rustic Oak. Colors may be intermixed.

Type:
Semi-Transparent

FEATURES:
• Environmentally safe
• Easy to clean up with soap and water
• Maximum protection from premature loss of color, surface mildew and water absorption
• Enhances the natural beauty and warmth of old and new wood

COVERAGE:
New Wood: 250-400 sq. ft./gal. per coat. Old Wood: 200-300 sq.ft./gal. per coat. Rate will vary depending on wood porosity. A two-coat application always yields the best results particularly on horizontal surfaces. Do not apply additional stain that will not absorb into the wood. Do not allow the stain to build and form a surface film.

COLORS:

ADDITIONAL INFORMATION:
• Storm Shield PDS (.pdf)
• Storm Shield Cedartone MSDS (.pdf)
• Storm Shield Redwood MSDS (.pdf)
• Storm Shield Honeytone MSDS (.pdf)
• Storm Shield Rustic Oak MSDS (.pdf)

TWP® 100 Series

TWP® 100 SERIES is an EPA registered wood preservative which contains a unique combination of chemicals which preserve and enhance the natural warmth, beauty and integrity of new and old wood. TWP® 100 SERIES penetrates deeply into wood without excessive surface film build, highlighting existing grain patterns with amazing clarity and warmth and is specifically designed to provide protection against the four major causes of wood degradation; wood rot, water, sunlight and mildew. TWP® 100 SERIES will not crack, peel or blister making maintenance an easy task to perform for extended wood protection. TWP® 100 SERIES is designed for use on new and old wood siding, fencing, decking and log homes. Refer to the Product Data Sheet (PDS) for preparation, cleaning and application instructions. This product is for exterior above ground use only.

Type:
Semi-Transparent

FEATURES:
• EPA REGISTERED Wood Preservative
• Premium Semi-Transparent Oil Stain
• Water Repellent Formula
• Stops U.V. Damage
• Mildew, Mold & Wood Rot Resistant
• Superior Color Retention Properties
• Long Lasting Formula and Easy Re-Coat

COVERAGE:
TWP should be applied at 100-400 sq.ft/gal. with brush, roll or spray. Rate will vary depending on wood porosity. Remove excess or puddled material that has not penetrated after 15 minutes with a paint pad or dry roller. Recoat over porous wood may be done as a wet on wet application.

COLORS:

ADDITIONAL INFORMATION:
• TWP 100 Series PDS (.pdf)
• TWP 100 Clear MSDS (.pdf)
• TWP 101 Cedartone MSDS (.pdf)
• TWP 102 Redwood MSDS (.pdf)
• TWP 105 Cape Cod Gray MSDS (.pdf)
• TWP 106 Prairie Gray MSDS (.pdf)
• TWP 115 Honeytone MSDS (.pdf)
• TWP 116 Rustic Oak MSDS (.pdf)
• TWP 120 Pecan MSDS (.pdf)

TWP® 1500 Series

TWP® 1500 SERIES is an EPA registered wood preservative which prevents structural damage and wood decay on exterior above ground wood surfaces such as untreated or previously treated fencing, decking, wood siding, log homes and roofing. TWP® 1500 SERIES resists water absorption that causes warping, cracking and splitting as well as preventing freeze damage in colder climates. TWP® 1500 SERIES is designed for use on new and old wood siding, fencing, decking and log homes. Refer to the Product Data Sheet (PDS) for preparation, cleaning and application instructions. This product is for exterior above ground use only.

Type:
Semi-Transparent

FEATURES:
• EPA REGISTERED Wood Preservative
• Premium Semi-Transparent Oil Stain
• Water Repellent Formula
• Stops U.V. Damage
• Mildew, Mold & Wood Rot Resistant
• Superior Color Retention Properties
• Long Lasting Formula and Easy Re-Coat
• TWP® 1500 SERIES has a V.O.C. of 350 grams/liter and is available for sale in all 50 states.

COVERAGE:
On horizontal surfaces, apply an initial coat at 300-400 sq. ft/gal. Allow material to penetrate 15-30 minutes and then apply a second coat at 400-500 sq. ft/gal. Typically a two coat application using this procedure is adequate, but wood porosity may dictate the use of more or less TWP.

COLORS:

ADDITIONAL INFORMATION:
• TWP 1500 Series PDS (.pdf)
• TWP 1500 Clear MSDS (.pdf)
• TWP 1501 Cedartone MSDS (.pdf)
• TWP 1502 Redwood MSDS (.pdf)
• TWP 1503 Dark Oak MSDS (.pdf)
• TWP 1504 Black Walnut MSDS (.pdf)
• TWP 1511 California Redwood MSDS (.pdf)
• TWP 1515 Honeytone MSDS (.pdf)
• TWP 1516 Rustic Oak MSDS (.pdf)
• TWP 1520 Pecan MSDS (.pdf)
• TWP 1530 Natural MSDS (.pdf)

DEFY Water Repellent Wood Stain

DEFY® Original Synthetic Water Repellent Wood Stain is a unique water-based system that protects wood without damaging the environment. Most wood finishes are formulated with natural oils, such as linseed or soya that serve as a food source for mold and mildew. But the synthetic resins in DEFY® give it superior mold and mildew resistance without using excessive fungicides.

DEFY® is a water repellent that penetrates deeply and adheres to wood pores while allowing water vapors to escape. This advantage enables DEFY® Wood Stains to expand and contract without cracking or peeling. And DEFY® contains UV blockers that last longer than those in any comparable wood finish. Two coats applied wet on wet, go on smoothly and leave wood with the rich look of fine furniture.

DEFY® Original Synthetic Water Repellent Wood Stain is the choice of professionals who demand performance, but appreciate the advantages of water-based products that are easy to use and maintain. You invest a great deal of time and money in your home and with proper maintenance wood should retain its beauty and last a lifetime. So whether your wood is pine log, cedar siding, redwood, or CCA decking, there is no better way to protect your investment and the environment than with DEFY® wood finishes.

Type:
Semi-Transparent

FEATURES:
• Unique water-based system
• Water repellent that penetrates deeply and adheres to wood pores while allowing water vapors to escape
• Contains UV blockers that last longer than those in any comparable wood finish
• Choice of professionals

COVERAGE:
100-150 sq. ft. per gallon

COLORS:

ADDITIONAL INFORMATION:
• DEFY Water Repellent Wood Stain PDS (.pdf)
• DEFY Water Repellent Wood Stain MSDS (.pdf)

DEFY Epoxy Fortified Professional Wood Stain

Staining pressure treated wood is easy when you use this professional deck stain. DEFY® Epoxy Fortified wood stain is a high performance semi-transparent penetrating finish that helps prevent the destructive effects of water, fungi, and UV radiation on exterior wood. With its unique epoxy fortified synthetic resin, this product is able to penetrate wood pores to block out the damaging effects of weather while allowing the natural beauty of the wood to shine through. DEFY® Epoxy Fortified wood stain is ideally suited for staining pressure treated wood and can be used on interior or exterior wood surfaces including: wood siding, log homes, decks, fences, shake shingles, outdoor wood furniture, pressure treated lumber, and all other naturally porous wood surfaces.

Type:
Semi-Transparent

FEATURES:
• Unique epoxy fortified synthetic resin
• Penetrates wood pores to block out the damaging effects of weather
• Ideally suited for staining pressure treated wood
• Can be used on interior or exterior wood surfaces

COVERAGE:
100-150 sq. ft. per gallon

COLORS:

ADDITIONAL INFORMATION:
• DEFY Epoxy Fortified Wood Stain PDS (.pdf)
• DEFY Epoxy Fortified Wood Stain MSDS (.pdf)

DEFY UV-Resistant Clear Wood Finish

DEFY® UV-Resistant Clear Wood Finish is a clear deck stain designed with a clear uv inhibitor to prevent graying and protect the natural appearance of your wood. Now you can protect your wood from the damaging effects of the sun and moisture without altering the color of your wood. With annual maintenance, this deck sealer will make the natural beauty of your exterior wood more appealing by providing protection from the elements.

Type:
Clear

FEATURES:
• Clear UV Inhibitors – DEFY® UV-Resistant Clear Wood Finish has fortified UV blockers that prevent graying caused by the harmful effects of the sun while adding little to no change to the natural look of your wood
• Epoxy Tough Resins - the epoxy helps to bond the sealer to the wood fibers greatly extending the life of the sealer
• Soap and Water Cleanup – this water-based formula is easy to use, easy to maintain and is biodegradable
• Environmentally Friendly – all DEFY® deck sealers are 250 V.O.C. compliant and have been approved by the Master Painter's Institute to be environmentally friendly.
• Can be used on interior or exterior wood surfaces

COVERAGE:
100-150 square feet per gallon, depending on wood texture and porosity.

COLORS:

ADDITIONAL INFORMATION:
• DEFY UV-Resistant Clear PDS (.pdf)
• DEFY UV-Resistant Clear MSDS (.pdf)

DEFY Extreme Semi-Transparent Wood Stain

DEFY® Extreme Wood Stain is a semi-transparent wood stain formulated using state of the art Nano-Technology to create a level of durability that has simply not been available in a wood stain finish in the past. Ultra violet rays cause wood to turn gray and become susceptible to water penetration and decay. DEFY® Extreme Wood Stain effectively protects the wood from the harmful effects of the sun and protects wood from graying. Extreme Wood Stain contains zinc oxide particles that reflect the damaging Ultraviolet Rays from the sun. When you reduce the size of these zinc particles down to the nano level, they become invisible to the naked eye. These nano-particles are distributed at a rate of over 30 trillion per square inch of surface area to provide protection from the sun in much the same way as they do when used in sun blockers and sunscreen lotions.

Type:
Semi-Transparent

FEATURES:
• Designed to be used on interior or exterior wood surfaces
• Highly resistant to mold and mildew
• State of the art Nano-Technology
• Provides the maximum UV protection available
• VOC compliant

COVERAGE:
100-150 sq. ft. per gallon

COLORS:

ADDITIONAL INFORMATION:
• DEFY Extreme Wood Stain PDS (.pdf)
• DEFY Extreme Wood Stain MSDS (.pdf)

DEFY Extreme Clear Wood Stain

DEFY® Extreme Wood Stain is a clear wood stain formulated using state of the art Nano-Technology to create a level of durability that has simply not been available in a clear wood stain finish in the past. Ultra violet rays cause wood to turn gray and become susceptible to water penetration and decay. DEFY® Extreme Wood Stain effectively protects the wood from the harmful effects of the sun and protects wood from graying. Extreme Wood Stain contains zinc oxide particles that reflect the damaging Ultraviolet Rays from the sun. When you reduce the size of these zinc particles down to the nano level, they become invisible to the naked eye. These nano-particles are distributed at a rate of over 30 trillion per square inch of surface area to provide protection from the sun in much the same way as they do when used in sun blockers and sunscreen lotions. This results in a "Crystal Clear" finish that when dry, will give the longest lasting UV protection on the market for a clear deck finish! Not only will this help with prolonging the graying, but the nano-particles are highly resistant to mold and mildew, enabling you to retain the natural color. This VOC compliant crystal clear stain provides UV protection without adding a tint or changing the look of your wood which means that you can keep your wood deck naturally beautiful for longer.

Type:
Clear

FEATURES:
• Designed to be used on interior or exterior wood surfaces
• Highly resistant to mold and mildew
• State of the art Nano-Technology
• Provides the maximum UV protection available
• VOC compliant

COVERAGE:
100-150 sq. ft. per gallon

ADDITIONAL INFORMATION:
• DEFY Extreme Clear Wood Stain PDS (.pdf)
• DEFY Extreme Clear Wood Stain MSDS (.pdf)